TS-590SG FIRMWARE


HOME TS-590SG TS-590S COMMON OTHER SOFTWARE OTHER HARDWARE VIDEOS MISCELLANEOUS FEEDBACK MORE G3NRW SITES

Updated 17 November 2016

Note: This firmware is for the TS-590SG, not the TS-590S.

Firmware VersionRelease DateNotes
v1.0417 November 2016Revises [fixes] the following symptom:
1. The internal antenna tuner may not work correctly under certain conditions


Installing the Firmware


Which version is installed in the radio?

There are three methods of finding out which firmware version is installed in your TS-590SG:

Method #1

  1. Turn the radio OFF at the front-panel ON/OFF button.
  2. While holding in the M.IN button, turn the radio ON again at the front panel ON/OFF button.
  3. The currently installed firmware version is displayed on the front panel.
  4. Release the M.IN button.
  5. Turn the radio OFF and ON again to resume normal operation.

Method #2

  1. Start ARCP-590G.
  2. Connect to the radio in the usual way.
  3. Click on “Help > About” to see the currently installed firmware version.

Method #3

  1. Turn the radio ON at the front-panel ON/OFF button.
  2. Select Menu #00.

 


HOME TS-590SG TS-590S COMMON OTHER SOFTWARE OTHER HARDWARE VIDEOS MISCELLANEOUS FEEDBACK MORE G3NRW SITES